DesignReForm.net

Proposal

Looks good.

progress

are you guys using a massing to build the form?

massing attempt

2 issues

1: inside the family, we cannot understand where the boundary of the panel is. We want the lower part of the auditorium to be at the edge and then the legs to extend. So that in the project we can adjust ref. planes and insert a curtain wall

2: inside the family, we added a parameter to control the profile thickness. What we want to do next is exactly the tutorial with the lined based parametric array, to generate more "V's" depending on the width of the auditorium. The problem is that we can't copy the legs with their ref lines. they seem to be locked to a specific plane.

1. The Edge of the Panel are the original Reference planes that were in the curtain panel family.  We then made a few ref planes outside of those to control the cantilevers so that might be throwing you guys off.  Your curtain panel object should grow to the extents of your curtain panel in in your project file.

2. you need to build the legs in a separate family then bring them in.  You won't be able to use that technique in the curtain panel family.

Hope that answers your question if not please let me know.  I might come in this week to help guys if you are getting stuck.

Dave