Main Content:

DesignReForm.net | Work Shops / Classes | ReThinking BIM - Spring 2008 | Eun Lee and Judy Lo Project Proposal
Pages: [1]

Eun Lee and Judy Lo Project Proposal

0 Members and 1 Guest are viewing this topic.
Eun Lee and Judy Lo Project Proposal
« on: April 03, 2008, 09:18:11 PM »
This is our initial proposal for the final project.
Thank you!
 Smiley
* final_proposal_revised.pdf (4151.95 KB - downloaded 110 times.)
Logged
  • dfano
  • Administrator
  • User
  • *****
  • Offline Offline
  • Posts: 270
  • View Profile WWW Email
Re: Eun Lee and Judy Lo Project Proposal
« Reply #1 on: April 03, 2008, 11:23:09 PM »
That is a GREAT project.  The physical model won't be so much about making mullions but about design intents and the ability to make these things.

Nice choice
Logged
  • jlo
  • User
  • *
  • Offline Offline
  • Posts: 6
  • View Profile
Re: Eun Lee and Judy Lo Project Proposal
« Reply #2 on: April 20, 2008, 04:49:48 PM »
This is the progress of our project.  We ran into some problems.  Please refer to our attached pdf file with specific questions. Thank you very much!
* question_1.pdf (310.91 KB - downloaded 36 times.)

* snapshot-progress_042008.jpg (126.99 KB, 794x592 - viewed 157 times.)

* snapshot-progress_042008-marks.jpg (143.89 KB, 806x639 - viewed 153 times.)
Logged
Re: Eun Lee and Judy Lo Project Proposal
« Reply #3 on: August 05, 2008, 02:53:56 PM »
I know this thread is old and the class is over but what the hell.

I think I've got a solution. I had to make a few assumptions (e.g., the flat spot is 4" wide and is 1/3 higher than the block at the end) but I think the concept still works.

The flat spot was the trickiest part. I started trying to sketch the flat but it kept breaking so instead I let the block go past and use a Void to cut it off.

What do you think?
* Angled Block - CW Panel.rfa (508 KB - downloaded 19 times.)
« Last Edit: August 05, 2008, 03:13:20 PM by GMcDowellJr »
Logged
Pages: [1]
DesignReForm.net | Work Shops / Classes | ReThinking BIM - Spring 2008 | Eun Lee and Judy Lo Project Proposal
Jump to: